38a Woodside Road Solar PV case study hero
Back to Case Studies
ECO4Solar PV 3.6kWFlat Above ShopsMCS Certified

38a Woodside Road — ECO4 Solar PV & Retrofit

Flat Above Shops · Ketley, Telford, Shropshire · TF1 5HW

EPC Improvement

F

Before

Improved
B

After

Project Details

Property Type

Flat Above Shops (FAS)

Construction

Cavity / Solid Wall, Pitched Roof

Location

Ketley, Telford TF1 5HW

Solar Array

8 × 450W panels = 3.6kW

Funding Stream

ECO4 (Energy Company Obligation)

Client Type

Private Rented Sector

Inverter

Fox inverter, G98/G99 compliant

Key Stats

F→B

EPC Uplift

3.6kW

Solar PV

12

Panels

Fox

Inverter

Scope of Works

  • Solar PV — 8 × black monocrystalline panels
  • Fox inverter, MCS certified, G98/G99 compliant
  • New consumer unit with dedicated Solar Inverter MCB
  • DC isolator, generation meter & AC isolator
  • High-retention Electric Storage Heaters (ESH)
  • Loft Insulation top-up to 300mm
  • Decentralised Mechanical Extract Ventilation (DMEV)
  • TrustMark Lodgement Completed

Compliance

StandardPAS 2030 / MCS
Grid ConnectionG98/G99 compliant
Consumer UnitBS EN 61439-3
TrustMarkLodged ✓
MCSCertified ✓

Solar PV for your properties?

EmberSol delivers MCS-certified Solar PV under ECO4 and self-funded, including flats above shops and hard-to-treat properties.

Get a Quote

Project Overview

EmberSol delivered a full ECO4 retrofit at 38a Woodside Road, Ketley, Telford — a flat above a commercial parade including the Ketley Shop and Blades & Fades. The property is a hard-to-treat flat above shops (FAS) with a pitched roof, presenting the challenge of installing Solar PV on a shared roof structure above commercial tenants. The EmberSol branded scaffolding hoarding is visible in the street-level photograph, with the completed Solar PV array visible on the roof behind.

The primary renewable measure was a 3.6kW Solar PV system comprising 8 black monocrystalline panels in a 2×4 configuration on the west-northwest facing pitched roof. The panels are connected via a Fox inverter with a dedicated DC isolator, generation meter, and AC isolator. A new consumer unit (QFS-MX12M, BS EN 61439-3) was installed with a dedicated B16 MCB for the Solar Inverter circuit, alongside RCBOs for all other circuits. The installation is MCS certified and G98/G99 compliant for connection to the distribution network.

The loft insulation was upgraded to 300mm Knauf mineral wool, replacing the heavily degraded original insulation documented in the pre-works survey photographs ( November 2025). The degraded insulation is clearly visible across the full loft floor width in both survey photographs. High-retention Electric Storage Heaters (ESH) were installed to replace the previous inefficient direct-acting electric heaters — two units are documented: a tall storage heater in the bedroom and a panel heater with digital controls. Decentralised Mechanical Extract Ventilation (DMEV) was installed to maintain healthy indoor air quality.

The project demonstrates EmberSol's capability to deliver multi-measure ECO4 retrofits in hard-to-treat flat above shops properties, combining Solar PV, ESH, loft insulation, and ventilation under a single coordinated programme with full PAS 2030, MCS, and TrustMark compliance.

Site Photography

Compliance photos covering the full installation: street-level scaffolding view, Solar PV array on roof, loft pre-works survey (22 Nov), ESH heaters, new consumer unit, Fox inverter, DC isolator and generation meter (27 Nov). Click any image to enlarge.

Technical Specification

Solar PV Array8 × black monocrystalline panels
System Size3.6kW peak
OrientationWest-northwest
InverterFox inverter, MCS certified
Consumer UnitQFS-MX12M, BS EN 61439-3
Grid ConnectionG98/G99 compliant
HeatingHigh-retention Electric Storage Heaters
Loft InsulationKnauf 300mm top-up
VentilationDMEV — continuous background extract
Pre-Works EPCF
Post-Works EPCB
Property TypeFlat Above Shops (FAS)
LocationKetley, Telford TF1 5HW
TrustMarkLodged ✓
FundingECO4